Tools



Lambretta workshop manual M001
Out Of Stock
£20.00
(+ postage: £3.00)


Clutch compressor M003

 Out Of Stock

£8.00
(+ postage: £4.00)


Stainless steel rear axle stand M004

Out Of Stock

£5.00
(+ postage: £2.50)


Steel rear axle stand M005
£3.00
(+ postage: £2.50)


Plastic oil jug M006

Marked at 2% on one side, 3% on the other.

£2.00
(+ postage: £0.75)


Engine stand (inc bar/nuts) M007

Out Of Stock

£37.99
(+ postage: £9.00)


Heavy duty fork spring compressor M008
£19.99
(+ postage: £6.00)


Rear shock absorber spacer bar, 2 position M009
£5.00
(+ postage: £4.00)


Heavy duty flywheel holding tool M010

Fits 2 or 3 hole flywheels

£16.00
(+ postage: £5.00)


Medium duty steering spanner set M011
£13.00
(+ postage: £5.00)


Clutch holding tool - outer M012
£5.00
(+ postage: £3.00)


Clutch holding tool - inner M013
£5.00


Rear hub puller, Ser 3 M014

Out Of Stock

£12.00
(+ postage: £3.00)


Flywheel puller, double sided M015

Fits Italian/Indian & Spanish

£6.00
(+ postage: £3.00)


Clutch compressor fixed type M016
£13.50
(+ postage: £5.00)


Clutch compressor loose type M017
£19.99
(+ postage: £5.00)


Rear hub puller S1, S2, S3 M018

Universal

Out Of Stock

£7.00
(+ postage: £3.00)


Front sprocket sleeve removal puller M019


£12.00
(+ postage: £4.00)


Front hub & end plate bearing refitting drift M020
£6.00
(+ postage: £3.00)


Top dead centre tool M021
£6.00
(+ postage: £2.00)


Mag flange bearing extractor M022


£14.00
(+ postage: £4.00)


M6 T-Spanner set M023

Mag housing & end plate removal

£12.00
(+ postage: £3.00)


Crank pulling sleeve tool M024
£8.00
(+ postage: £2.00)


Conrod holding tool M025
£9.00
(+ postage: £3.00)


Clutch spring holding tool M026


£9.00
(+ postage: £2.50)


Badge centre punch refitting tool M027
£3.00
(+ postage: £1.00)


Flywheel puller, single thread Italian/Indian M028
£5.00
(+ postage: £3.00)


Gear cluster outer track drift M029
£6.00
(+ postage: £4.00)


Mag bearing track drift M030
£9.00
(+ postage: £4.00)


Silent block removal refitting tool M031
£29.00
(+ postage: £6.00)


Heavy duty steering spanner set M032
£17.00
(+ postage: £6.00)


Stand spring removal / refitting tool M033
£5.00
(+ postage: £2.50)


Combi wheel nut & plug spanner M035

As supplied in tool roll of new Lambretta

£3.50
(+ postage: £1.50)


Lambretta Engine Rebuild 2-disc DVD M036

Watch and follow as Sausage clearly shows you how to remove a Lambretta engine from its frame, strip it down to its last nut and bolt and then completely rebuild it, replace it, and start it up! 
At over 7hrs long, this double dvd is broken down into individual chapters and is a must whether you want to learn how to completely rebuild your engine or simply replace your clutch or top end. Throughout this DVD Sausage uses his 20yrs experience to show you the viewer how to use the correct tools, offering  countless tips and helpful hints and showing you  how to identify worn parts that need replacing.

Again, in stunning digital widescreen, this UK produced quality double DVD is a genuine first that all Lambretta owners new or old should not be without.

£20.00
(+ postage: £2.50)


Lambretta Running Maintenance DVD M037
Using a Series 3 Lambretta, our presenter Sausage, clearly shows you how to change innertubes, tyres, bulbs, control cables, spark plugs and much much more. We also take a look at a Series 1, drawing attention to the main differences between the older models. With well over 2 hrs crammed full of handy tips and advice gained from over 20yrs scootering experience, this DVD is easy to follow and will help you keep your scooter in top condition and on the road.  . 
Shot in full digital widescreen, playable anywhere in the world, this is a quality product that no Lambretta owner, new or old should be without.
£16.00
(+ postage: £2.00)


Vespa Running Maintenance DVD M038
With over 2 hrs of easy to follow footage, Sausage uses all of his experience to show you how to maintain and keep your Vespa in top running order. From changing cables to replacing blown bulbs, swapping out flat tyres to offering advice on many topics, this DVD will help you keep your scooter where it belongs - on the road
 Based around a P range Vespa, he also takes a look at an older GS model, highlighting  differences between the older Vespa models. 
This quality product, shot in full digital widescreen and playable anywhere in the world,  is a must  have for all Vespa owners.
£16.00
(+ postage: £2.00)


Clutch spring alignment tool M039

 Out Of Stock

£8.00
(+ postage: £4.50)


Fork spring compressor tool M040

Out Of Stock

£12.50
(+ postage: £6.00)


Digital vernier calipers M041
£8.00
(+ postage: £2.00)


Kickstart modification tool M042

Designed to modify your crankcase side to allow the fitment of the stronger GP type kick start shaft. Fits onto a drill and used to shave away the alloy on the inside of the chaincase cover

£29.99
(+ postage: £4.00)


Laser Cut clutch holding tool M043
Laser cut steel clutch plate holder. Safely holds the clutch assembly while you undo or tighten the clutch nut. Works by locking up the clutch spider and sprocket against the rear shock absorber bolt to hold the clutch still
£9.50
(+ postage: £3.50)


Crankshaft extracting tool M044

Bolts to the crankcase side and turning the large bolt safely pushes the crankshaft free. Saves damaging the crankshaft by hitting it with a hammer to free it when removing.

£13.99
(+ postage: £4.50)


Final drive pulling sleeve M045

Used to fully pull in the layshaft into the rear hub without having to fit the rear hub. It has the effect of fully pulling in the layshaft allowing you to check the gearbox and endplate tolerances correctly

£6.99
(+ postage: £2.75)


Alloy-made timing disc M046

For use in setting the ignition timing and also has a special section marked where the transfers, inlet and exhaust ports open to assist with measuring ports when tuning a cylinder

£13.99
(+ postage: £4.00)


Vespa Engine Rebuild 2-disc DVD M047
Watch and  follow as Sausage clearly shows you how to remove a Vespa engine from its frame, strip it down to its last nut and bolt and then completely rebuild it, replace it, and start it up! 

At over 5 hrs long, this double dvd is broken down into individual chapters and is a must whether you want to learn how to completely rebuild your engine or  simply replace your clutch or top end.
  

Throughout this DVD Sausage uses his 20yrs experience to show you the viewer how to use the correct tools, offering  countless tips and helpful hints and showing you  how to identify worn parts that need replacing. 

£20.00
(+ postage: £2.50)

Mag flange bearing punch long reach M048
£8.99
(+ postage: £5.00)

Make payments with PayPal - it's fast, free and secure!