Tools



360 degree turning engine stand EE045

Bench mount engine stand. Turns through 360 degrees to work on the engine from any angle.

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£49.99
(+ postage: £9.00)


Crankshaft bearing track remover EE002

This tool is used to remove the bearing sleeve from the crank when fitting a new bearing.

Never re-use the old inner bearing track when fitting a new bearing, remove the old one first and then fit the new one from the new bearing.

2 versions, 1 for SX type cranks and 1 for GP cranks. Choose from options list.

Choose from SX / LI thin taper crank or GP wide taper crank.

This can be used with the crankshaft still in the engine.

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£999.99
(+ postage: £6.99)
Options:


Mag housing remover EE003

Out of stock

Mag housing removal tool with the crank in situ.

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£99.99
(+ postage: £4.90)


Crankshaft extractor EE004

Never attempt to knock the crankshaft out of the engine as it is easily knocked out of line. This tool allows you to gently push the crankshaft out.

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£10.99
(+ postage: £4.90)


Laser Cut clutch holding tool EE007

Laser cut steel clutch plate holder. Safely holds the clutch assembly while you undo or tighten the clutch nut. Works by locking up the clutch spider and sprocket against the rear shock absorber bolt to hold the clutch still.

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£16.99
(+ postage: £4.90)


Alloy-made timing disc EE010

It is made in aluminium for durability

It is marked to use for general timing setting and also has special section marked where the transfers, inlet and exhaust ports open to assist with measuring ports when tuning a cylinder

180mm OD and 12mm ID marked in 0.5 of degrees.

Designed by Mark Broadhurst to make workshop timing of engines easy.

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£14.99
(+ postage: £2.90)


Rear shock absorber spacer bar, 2 position EE012

Holds the engine in position with the rear shock absorber removed.

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£4.90
(+ postage: £4.90)


Heavy duty fork spring compressor EE011

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£17.99
(+ postage: £6.50)


Medium duty steering spanner set EE014

Out of stock

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£99.99
(+ postage: £6.50)


Heavy duty steering spanner set EE015

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Out of stock

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£99.99
(+ postage: £6.00)


Clutch holding tool - outer EE016

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£4.99
(+ postage: £4.90)


Clutch holding tool - inner EE017

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£4.99
(+ postage: £4.90)


Clutch compressor fixed type EE019

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£11.99
(+ postage: £4.90)


Clutch compressor loose type EE020

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£16.99
(+ postage: £6.50)


Front sprocket sleeve removal puller EE021

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£9.99
(+ postage: £4.90)


Front hub/end plate bearing refitting drift EE022

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£8.99
(+ postage: £4.90)


Mag flange bearing extractor EE023

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£14.00
(+ postage: £4.90)


M6 T-Spanner set EE024

This tool is used for removing the magneto housing and the gearbox endplate - you just insert each piece in to the threaded hole and evenly twist away.

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.


Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£11.99
(+ postage: £4.90)


Conrod holding tool EE026

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£7.99
(+ postage: £4.90)


Flywheel puller, single thread Italian/IndianEE029

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£4.99
(+ postage: £4.90)


Clutch spring holding tool EE027

Holds the springs in place when compressing the clutch. Very useful with the engine still in the frame.

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£7.99
(+ postage: £4.90)


Silent block removal refitting tool EE032

For fitting and removing the engine mounts [silent blocks].

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£24.99
(+ postage: £6.99)


Stand spring removal / refitting tool EE033

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£4.99
(+ postage: £2.70)


Rear Hub Puller EE035

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£9.99
(+ postage: £4.90)


Rear axle stand EE039

mild steel 3.99

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.


Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£3.99
(+ postage: £4.90)


Exhaust Spring Puller EE037

Best described as a "knuckle saver", an absolute must for fitting exhaust springs. Item now different from the picture but improved design, will post new picture soon.

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£6.50
(+ postage: £2.90)


Fork spring compressor tool EE041

Out Of Stock

Finish may vary from the picture.
Latest batch are Zinc coloured

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£99.99
(+ postage: £6.50)


Gudgeon pin removal tool EE042

Great little tool for removing and fitting 16mm gudgeon pins on most Lambretta pistons

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£5.99
(+ postage: £2.70)


Rivet punch EE043

Punch for closing rivets on tool box door locks, etc

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£4.99
(+ postage: £4.90)


MB flywheel holding tool EE048

Out Of Stock

This tool will hold 90% of Lambretta flywheels.

It is double ended and will hold normal Italian Series 3 type flywheels as well as the AF/J range, Early Motoplat and Indian electronic flywheels.

The only flywheels it will not fit are the later Spanish Motoplat electronic flywheels and some early Series 1 and 2 flywheels where the holes were in a strange offset arrangement.

These now come with a removable handle so they fit into the toolbox.

This tool is preferred to jamming a screwdriver in the fins and risking breaking off a fin.

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£99.99
(+ postage: £4.90)


Top dead centre tool EE044

For finding the piston TOP DEAD CENTRE using the positive stop method

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£5.99
(+ postage: £2.70)


Tyre levers EE049

A must have when fitting tyres on tubeless rims.

A job made easier by heating the tyre first.

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£9.99
(+ postage: £4.90)


Stud extractor EE050

Great for removing stubborn studs [but not snapped ones]. 1/2 inch drive, perfect for 6mm and 8mm studs.

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£14.99
(+ postage: £4.90)


Heavy duty flywheel holding tool EE013

Fits 2 or 3 hole flywheels. Not as nice quality as the MB version above but does the job.

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£14.99
(+ postage: £4.90)


Badge centre punch refitting tool EE028

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£2.99
(+ postage: £2.70)


Final drive pulling sleeve EE009

Used to fully pull in the layshaft into the rear hub without having to fit the rear hub. It has the effect of fully pulling in the layshaft allowing you to check the gearbox and endplate tolerances correctly.

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£4.99
(+ postage: £4.90)


Crank pulling sleeve tool EE025

Never hit a crankshaft, always use the correct tools to pull in and push out a crankshaft.

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£7.99
(+ postage: £4.90)


New style rear wheel jack EE040

Now comes in stainless steel.

Flat seating, much easier to use and more secure than the standard type rear wheel jack.

Just slot the pin into the dedicated hole at the rear of the engine casing, lift rear of scooter and the jack will fall into place.

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£12.99
(+ postage: £4.90)


Mag bearing track drift EE031

Tool to fit the mag-side bearing sleeve onto the crankshaft.

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£6.99
(+ postage: £4.90)


Rear hub holding tool EE050

This bolts to your rear hub [with wheel removed] so that you can hold the hub in place when torquing up the rear hub nut and also when pulling in layshft to shim the layshaft to end plate clearance.

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£25.99
(+ postage: £6.90)

Timing light strobe EE051

Timing light strobe to check ignition timing on 12 volt systems. Requires the use of a 12 volt battery or battery charger.

Maximum UK mainland P&P price is 10.00 [apart from side panels] so any amount paid over 10 will be retrospectively refunded via Paypal.

Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.

£24.99
(+ postage: £4.90)

Make payments with PayPal - it's fast, free and secure!